ACTION
Refrigeration
Air Conditioning
Heating
This unit will run off the new Honda eu1000i 1,000 watt
portable generator, while in cool mode.  Another option is
to use a Statpower 1,800 watt inverter and 450+ amp
hours of battery power and you can anchor out (on
average) for one night.  We have actually had success
operating the Mermaid Model M5 off as low as a 1000
Watt Inverter and only 400 amp hours of battery power,
however, longer operating times, it is recommended to use
a higher wattage inverter and a bit more battery power.

Due to the construction of this unit, electric heat is not an
option with this unit.  This unit is ideal for the "tight fit"
installations and is a welcomed addition to larger vessels
for individual climate controlled cabins.  The Mermaid
Model "M5" has a rotatable blower so, no Air Discharge
option is necessary.

On average, this unit is designed to cool cruisers up to 26'
and sailboats up to 28'.

All M-5 units come Digital Thermostat.
Pump Not Included.  
Dimensions
Cool Only  L-15" W-11.5" H-11.5"
Reverse Cycle  L-18" W-12" H-11.5"

Running Amperage
Cool Only  4.4 Amps
Reverse Cycle  5.5 Amps
FX 1 Digital Stat
$198.00
Digital Programmable Stat
$75.00
Digital Non Programmable
$75.00
Cool Only List $1700.00
Internet Sale Price $1142.00
Reverse Cycle List  $1900.00
Internet Sale Price $1279.00
M5 Standard Installation Kit
$330.00
M5 Deluxe Installation Kit
$660.00
Standard 400 GPH
Sea Water Pump
Fresh or Saltwater
$90.00
Standard Install Kit Contains: (1) 5/8" Plastic Thru Hull, 6ft 1/2" Clear Drain Hose, 30ft 5/8" Blue Tracer Hose, 3ft
3/4" Red Tracer Hose, (8) #12 Stainless Steel Hose Clamps, (12) #8 Stainless Steel Hose Clamps, (12) #8 1/2"
Stainless Steel Mounting Screws, (4) #14 2" Stainless Steel Mounting Screws, (20) 14" Tie Straps, (1) Bronze Foot
Scoop With Screws, (1) Bronze 3/4" Seacock, (1) 3/4" Bronze Nipple, (1) 1/2" Bleed Off Valve, (1) 3/4" Thread to
Hose PVC Elbow, (1) 3/4" Small Water Strainer, (1) Metal Wye 4X4X4, (1) 12X8 Return Air Grill, 12.5ft 4"
Non-Insulated Duct, (2) 4" Round Plastic Supply Air Grills (white), (1) Marine Circuit Breaker, 20ft 12/3 Boat Power
Cable, 20ft 16/3 Pump Power Cable. All Items Can be Sold Separately.
Deluxe Install Kit Contains: (1) Chrome Thru Hull, (1) Chrome Drip Edge, 9ft 1/2" Clear Drain Hose, 30ft 5/8" Marine
Hose Blk Reinforced, 5ft 3/4" Marine Hose Blk Reinforced, (2) Teak 4X4 Supply Air Grills, ) Plastic Transition Boxes
4X4 with 4" End Ring, (1) Bronze Foot Scoop w/Mounting Screws, (1) Groco Bronze Raw Water Strainer, (1) 1/2"
Bleed Off Valve, (1) PVC Thread to Hose Elbow, (1) 3/4" Bronze Nipple, (1) 4X4X4 Plastic Hose Wye, (1) 12X8
Teak Return Air Grill, 12.5ft Non-Insulated 4" Duct, (1) Standard Marine Breaker, 20ft 12/3 Boat Power Cable, 20ft
16/3 Pump Power Cable, (8) #12 Stainless Steel Hose Clamps, (12) #8 Stainless Steel Hose Clamps, (12) #8 1/2"
Stainless Steel Mounting Screws, (4) #14 2" Stainless Steel Mounting Screws, (20) 14" Tie Straps. All Items Can Be
Sold Separately.
Mermaid's standard pump, the Teel 1P808 pump is designed for single unit
applications @ 400 Gallons per Hour to be used with no more than a five foot vertical
lift and no more than 15 feet of overall hose.  This pump can be used for all Mermaid
units.
M5 5,200 BTU System