Refrigeration
Air Conditioning
Heating
ACTION
More is always better! This unit will run off the new
Honda eu1000i 1,000 watt portable generator, while in
cool mode. Another option is to use a Statpower 1,000
Watt Inverter and 450 amp hours of battery power and
you can anchor out (on average) for one night. The
electric heat option generates 5,640 BTU of heat.
Electric heat option is not available in 220/240 Volt
configurations.
This unit is designed to cool cruisers up to 27' and up to
30' sailboats.

This unit is available in right, left or top air discharge
configurations, and is now available as a cool reverse
cycle heat unit., We use 4" ducting and recommend a
minimum of 2, 4" round supply grills with this installation.

All M6 units come with digital thermostat. Pump not
included.
Dimensions
L-16" W-11.5" H-11.5"
Left and Top Discharge Add 1" to Length

Running Amperage
Cool Only 6.4 Amps
Electric Heat 17.5 Amps
Reverse Cycle 7.5 Amps
M6 6,500 BTU System
Cool Only List $1,700.00
Internet Sale Price $1,241.00
Electric Heat List $1750.00
Internet Sale Price $1,277.50
Reverse Cycle List $1860.00
Internet Sale Price $1357.80
FX 1 Digital Stat
$198.00
Digital Programmable Stat
$75.00
Digital Non Programmable
$75.00
M6 Standard Installation Kit
$330.00
Standard Install Kit Contains: (1) 5/8" Plastic Thru Hull, 6ft 1/2" Clear Drain Hose, 30ft 5/8" Blue Tracer Hose, 3ft
3/4" Red Tracer Hose, (8) #12 Stainless Steel Hose Clamps, (12) #8 Stainless Steel Hose Clamps, (12) #8 1/2"
Stainless Steel Mounting Screws, (4) #14 2" Stainless Steel Mounting Screws, (20) 14" Tie Straps, (1) Bronze Foot
Scoop With Screws, (1) Bronze 3/4" Seacock, (1) 3/4" Bronze Nipple, (1) 1/2" Bleed Off Valve, (1) 3/4" Thread to
Hose PVC Elbow, (1) 3/4" Small Water Strainer, (1) Metal Wye 4X4X4, (1) 12X8 Return Air Grill, 12.5ft 4"
Non-Insulated Duct, (2) 4" Round Plastic Supply Air Grills (white), (1) Marine Circuit Breaker, 20ft 12/3 Boat Power
Cable, 20ft 16/3 Pump Power Cable. All Items Can be Sold Separately.
M6 Deluxe Installation Kit
$660.00
Deluxe Install Kit Contains: (1) Chrome Thru Hull, (1) Chrome Drip Edge, 9ft 1/2" Clear Drain Hose, 30ft 5/8" Marine
Hose Blk Reinforced, 5ft 3/4" Marine Hose Blk Reinforced, (2) Teak 4X4 Supply Air Grills, ) Plastic Transition Boxes
4X4 with 4" End Ring, (1) Bronze Foot Scoop w/Mounting Screws, (1) Groco Bronze Raw Water Strainer, (1) 1/2"
Bleed Off Valve, (1) PVC Thread to Hose Elbow, (1) 3/4" Bronze Nipple, (1) 4X4X4 Plastic Hose Wye, (1) 12X8
Teak Return Air Grill, 12.5ft Non-Insulated 4" Duct, (1) Standard Marine Breaker, 20ft 12/3 Boat Power Cable, 20ft
16/3 Pump Power Cable, (8) #12 Stainless Steel Hose Clamps, (12) #8 Stainless Steel Hose Clamps, (12) #8 1/2"
Stainless Steel Mounting Screws, (4) #14 2" Stainless Steel Mounting Screws, (20) 14" Tie Straps. All Items Can Be
Sold Separately.
Standard 400 GPH
Sea Water Pump
Fresh or Saltwater
$90.00
Mermaid's standard pump, the Teel 1P808 pump is designed for single unit
applications @ 400 Gallons per Hour to be used with no more than a five foot vertical
lift and no more than 15 feet of overall hose.  This pump can be used for all Mermaid
units.
Discharge
Discharge
Discharge